Ask for information now. You we'll be contacted by an our appointe near to you.

Ecotex TXT

Under screed resilient underlay ECOTEX TXT 7 mm thick made of cotton waste of white colored fabrics, obtained from a sanitized and sterilized mixture of filaments of cotton, linen and wool, maintained in plates of dimensions 1.20 m x 2.00 m by means of adhesive polypropylene.

The product is certified Indoor Air Comfort GOLD® which validates its very low VOC emissions in the context of a higher air quality in indoor environments in compliance with the main international protocols including, among others, the French VOC Regulation, Italian CAM Edilizia, BREEAM International and LEED.

Exotex TXT posa

  1. Lightened screed
  2. Flexo
  4. Tape supplied by Eterno Ivica
  5. Floor Heating
  6. Screed in sand-cement
  7. Glue
  8. Floor


  • Subfloor suitable for any type of application.
  • Excellent creep test value.
  • Being completely waterproof, it can be used with sand-cement screeds or self-leveling screeds, also when thrown directly in contact with product.
  • Suitable for applications with low thickness screed or dry screed.
  • Wide adhesive tape 10 cm included in delivery.
  • Ease and affordability of installation thanks to the format panels.


The laying takes place with the polyethylene film facing upward, drawing near the panels, with the only overlap of the selvedges, which will be subsequently sealed with adhesive tape of a width of 10 cm included the supply of the product. Before the ECOTEX TXT laying 7 mm thick, you must realize the perimeter disconnection with the appropriate FLEXO polyethylene clamp strip, which is placed along the perimeter of the room without leaving out the thresholds of the entrances and the doors-windows. 

The FLEXO strip must be cut only after laying the finished floor.

The whole floor area must be covered by the resilient underlay, leaving no point of contact. 
In presence of the underfloor heating system, this will only be installed after the installation of ECOTEX TXT 7 mm thick. 

The best performance of the product is obtained with the realization of a splitter screed mass of between 100 kg/m2 and 200 kg/m2.


Dynamic stiffness Creep Compressibility Thermal conductivity Water vapour resistance factor μ Reduction of impact noise
s’ = 27 MN/m3 5.1% c = 2.48 mm λ = 0.0358 W/mK µ = 195000 ∆L’ n,w = 30 dB



Code Format Dimensions Thickness Weight
L010122408 panel 1.20 m x 2.0 m 7 mm 1.36 kg/m2

Request more info about the product: Ecotex TXT