Ask for information now. You we'll be contacted by an our appointe near to you.
ECOTEX LIGHT TXT is a 7 mm thick under screed resilient underlay made from cotton waste of white colored fabrics, obtained from a sanitized and sterilized mixture of filaments of cotton, linen and wool, maintained in plates of dimensions 1.20 m x 2.00 m by means of adhesive polypropylene. Intended mainly for dry applications.
The product is certified Indoor Air Comfort GOLD® which validates its very low VOC emissions in the context of a higher air quality in indoor environments in compliance with the main international protocols including, among others, the French VOC Regulation, Italian CAM Edilizia, BREEAM International and LEED.
- Lightened screed
- ECOTEX LIGHT TXT
- Tape supplied by Eterno Ivica
- Granular material
- Double plate gypsum fiber
- Impact sound insulation produced from recycled materials and recyclable at the end of the life of the building.
- Intended mainly for dry applications.
- Excellent creep value.
- Permeable to water vapor.
- Can also be used as an underlay with Floating hardwood floors.
- Wide adhesive tape 10 cm included in delivery.
INDICATIONS OF INSTALLATION
The installation is done by combining the panels, without overlapping, with the subsequent sealing of the flaps with wide adhesive tape 10 cm included in the delivery of the product.
Before the ECOTEX LIGHT TXT 7 mm thick laying, you must realize the perimeter disconnection with the appropriate FLEXO polyethylene strip, which must be placed along the perimeter of the room without leaving out the thresholds of the entrances and the doors-windows.
The FLEXO strip must be cut only after laying the finished floor. The whole floor area must be covered by the impact sound insulation cloak, leaving no point of contact. For non-dry applications, the best performance of the product is obtained with the realization of a splitter screed mass of between 100 kg/m2 and 200 kg/m2, after application of impermeable film.
TECHNICAL DATA OF THE PRODUCT
|Water vapour resistance factor μ
|c = 2.48 mm
|λ = 0.0358 W/mK
|µ = 2
|1.20 m x 2.0 m